Latest Kitsrus.com News
Please be advised that we will be closed from 20th December 2009 until the 7th of January 2010 for Christmas and New Year Holidays.
The kit has been updated to include a DS1820 sensor plus extra components for use when using sensors on long cable lengths. Updated documentation also.
This kit is an 'extension' of the K145 Temperature Logger kit. Like the K145 it features four (4) temperature inputs using the DS1820 digital sensor. In addition four (4) relays have been added to provide output control. Supplied with plastic case and front/rear panels for a professional looking finish. Commands for reading temperatures or controlling relays are sent via the RS232 interface using simple text strings (see documentation for details). The kit can be controlled using a simple terminal or communications program (such as Hyperterminal) or via a freeware Windows application written by John Gray. Click here for kit features and specifications and further details of freeware software.
Note: Kit requires connection to a PC running software for temperature monitoring and/or control.
Kit 135 back in Stock. DC to DC Converter.
Stock Clearance. Limtited Stock Only
Kit 128 and Kit 150.
Please contact email@example.com for details.
Introducing a new kit :
Kit190 4-Channel Temperature Monitor and Control
Functionally, it's a very nice little unit -- easy to communicate with (a simple command structure, and simple data structure), and easy to do hookups. Internally, the relay channels are independent of the sensor channels. So, in your software you can set up linkage in any way you like. The K145 is constantly pushing data out the serial line. With the K190, you have to poll the board for temperature data. The board will work with the same DS1820 and DS18S20 sensors that the K145 uses, but can handle the DS18B20 sensor as well.
We have updated the entires for Kits 108, 134, and 145. Please check them out for further details.
Introducing new kits 188/189 ISD1740/17120 Second Voice Recorder Module. Non-volatile multi message recorder using ISD chips. Just change one resistor for longer duration. Standalone operation using just six onboard bottons. Record via built-in microphone or external line in. Speaker and line out connector. SPI interface. 8-24 VDC.
Kits 108 and 141 are now available in a fully ready, assembled and tested form. Please contact your local distributor for details.
I've spent a few days and created a new website. Hope you all like it. Send comments or criticisms to john (at) crowcroft.net
RoHS (lead free) regulations
From July 1st 2006 all electronic devices and components, including kits, imported into the European Union must comply with RoHS legislation governing the amount of lead content. A number of other countries around the world are also considering or have already implemented similar legislation. As a result the kit manufacturer, DIY Electronics, is slowly changing over to use lead free PCBs and components in ALL kits. This will be a gradual change but should be complete by the end of 2006.
These changes will affect the price of the kits as leadfree components and PCBs are more expensive than the 'normal' type, in some cases by as much as 50%. Unfortunately these costs will have to be passed on to the end user so the cost of kits will slowly increase as each kit becomes 'lead free'.
The other change for end users will be solderability. Lead free components and PCBs cannot be soldered using current 'normal' soldering irons and solder. Lead free soldering requires higher temperature soldering irons and lead free solder. A lot of information regarding lead free soldering is available on the Internet - a Google search will turn up many hits. It is highly recommended that users familiarise themselves with leadfree soldering techniques before assembling any kits.
Please check the Pic Programmer section of the website for the updated DIY pack for them.
DIY Electronics is pleased to announce the launch of a new Kit, DIY Kit 187, the Stepper Motor Chopper Driver
DIY KIT 187: STEPPER MOTOR CHOPPER DRIVER
The Stepper Motor Chopper Driver is a Bipolar Stepper Motor Drive with easily adjustable current control up to 2A, based othe SGS-Thompson L297 and L298 stepper motor controller and driver IC’s.
Stepper motors are rated by current and and not by voltage. A chopper driver because it is switching on and off current allows a set current to be fed to the coils and not be dependent on the voltage of the power supply. The Chopper Driver also allows for the use of higher voltage power supplies (up to 36V) to overcome the effects of the inductance of the coils giving better performance and a higher top speed.
- Easily adjustable motor current (0.A to 2A)
- Full and Half stepping mode
- Step and Direction inputs
- Synchroniseable when using multiple drivers
- Enable input can be connected to ground to disable motor
- Connections via screw terminals
We will be closing shortly on the 1st of August for two weeks, until the 15th of August 2007.
I've deleted the new forums and reverted back to the old one - this was due to complications in trying to set up tough anti-spam filters, which stopped anyone from posting on the boards. I apologize for any inconvinience caused,
Introducing new DIY Kit 187 "Bipolar Chopper Stepper Motor Driver Kit"
Our new bipolar chopper drive allows you to get better performance from your stepper motor.
It uses a dual full bridge motor driver based on SGS Thompson chips L297 & L298. Motor current for each phase is set using an on-board potentiometer and the controller is capable of
handling motor winding currents of up to 2 Amps per phase.
It operates from a DC supply voltage of 9-36V. The drive provides all basic motor controls, including full or half stepping of bipolar steppers and direction control. Works with our range of large bipolar stepper motors MO-101, MO-102 and MO-103
All signals (Step, Direction, Enable) can be interfaced to external logic or a microcontroller. You can easily control the motor from your computer's parallel port or our serial stepper controller card!
This controller is perfect for desktop CNC applications.
Finished Dimensions (mm): 88Wx105Lx35H
The new forums have been set up, I hope you enjoy them as much as I do.
We are pleased to announce that we are introducing several new products into our range of electronic kits!
DVR81xx Series - Image Recording Module
"This image recording module is a standard module which can be designed for various applications by firmware change. We will provide some standard firmware but also help customer making his own application."
DVR8100 - Image Recording Module (With 4 bit command control)
"This image recording module is a standard module which using 4 bit data for various command control the module."
To ALL our customers,
There are some rumours getting around that DIY Electronics (HK) LTD has been sold or taken over. THIS IS NOT TRUE. It is still owned and operated by Ladda, the wife of the deceased founder Peter Crowcroft. Also, there are no intentions to sell the business either.
We at Kitsrus would like to wish everyone a prosperous new year! And we are back in Hong Kong and everything is running smoothly.
-The Kitsrus Team
Just a forward notice, but DIY Electronics will be closed for the duration of roughly 2 and 1/2 weeks from the 23rd of December until the 8th of January. On which we will be open again.
I have just set up a "Surplus Corner" under the "Misc" button on the left on the navigation menu. The page will list surplus components that we wish to sell.
Also on the page, there is a section introducing Victor Lee, and his company MCU
Click the links for more details.
There will be delays in shipment and orders for about 2 weeks after the 30th of August, due to reconstruction of the office that houses DIY Electronics/Kitsrus because of new building regulations. We apologize for any delays and inconvinience this may cause.
I've just finished making and uploading the new website - if you have any feedback, comments, praise, suggestions, criticisms, please send them along to john (AT) crowcroft.net
Edit: The PIC Programmer and Misc pages are not yet up, they should be soon within a few days
Just a bit of clarification - we have received some emails about the "Small order via paypal" topic. I would like to clarify that we are not selling Kits directly to customers, but rather, we are selling small components, resistors, ICs, etc etc for people who want them - not full scale completed Kits that we sell to distributors. We apologize for any confusion this might have caused. Edit: We will put up a page on the website soon relating to excess and stock components that we wish to sell.
The website listed in the documentation for downloading DIYpacks for PIC programmers K128/149/150/182 is 'offline'. The DIYpacks have been moved to this website - click here to download.